30X; Optical Zoom - Sanyo VCC-XZ200P Brochure

1/4" Color CCD High-resolution
AF Speed Dome Camera
VCC-9600P series

30x

Optical Zoom

Minimum Multi-spot/
520
illumination 5-section
0.04
TV Lines
lx
SSP
Electronic
24V AC
Network
( )
shutter or 230 V
Option
Upward Surveillance Enabled PTZ Operation
In addition to endless 360°/sec panning, the camera's lens
section enables 185°/sec tilting in the vertical plane for an
area of surveillance expanded by 5° (indoor applications only)
compared to previous models.
Horizontal level
Panning range
360˚
No dead areas with new speed dome cameras
Dead area when at 0° tilt
Image from conventional
camera* at 0° tilt
*VCC-9400P / 9300P cameras
Available in Three Forms, Outdoor Type, Surface Type or
In ceiling Type
The camera is available in three different styles. Assemble
them with different fittings and covers to make a camera
most suitable for your surveillance needs.
All around Privacy Masking
When there is a house, or even a
window, within the camera frame, it is
possible to mask the area so that it will
not appear on the monitor screen to
protect other people's privacy. Up to 24
rectangular masks of arbitrary size (rectangle) can be set.
Coaxial Control or RS-485
Coaxial control: SSP / H-SSP / PELCO-C
RS-485: SSP / H-SSP / PELCO-D
*Other protocols are now under development.
SSP (RS-485) Compatible
By using SSP (SANYO Security Serial Protocol), cameras and
DVRs can be controlled with just one controller over a daisy
chain connection up to a maximum of 254 devices. The
maximum cable length (total length of the daisy chain path) is
1200 m (4000 feet).
(Surface type)
ATW
Internal sync.
AWC
BLC
Manual Line lock
Pelco-D
AF Zoom
Support
lens
Tilting range
–5˚ to 185˚
endless
(With digital auto flip ON)
Upward tilt to 5° past zero for
an expanded area of surveil-
lance with VCC-9800P / 9700P /
9600P / 9500P cameras
1/4" Color CCD High-resolution
AF Speed Dome Camera
VCC-9500P series
30x
Optical Zoom
Minimum Multi-spot/
520
illumination 5-section
0.8
BLC
TV Lines
lx
SSP
Electronic
24V AC
Network
( )
shutter or 230 V
Option
Camera Control Unit VAC-70 (sold separately)
Remote set-up provides users with the feeling that they have
the camera right beside their monitor. Capable of setting up
VCC-9800P / VCC-9700P / VCC-9600P / VCC-9500P for all on-
screen menu items (intelligent digital motion detector,
backlight compensation, white-balance, etc.)
*See page 33 for details.
Easy-to-Manage Installation, Setup and Adjustment
Enclosed within the housing are an integrated lens, a motor
and a pan/tilt mechanism. Attachment to the power supply
base by simply sliding the release levers simplifies installation
at the point of surveillance. The settings circuit board is
detachable for access to protocol, address and other switch
settings.
Detachable without Detachable Settings Circuit Board
disconnecting power cable
Release
lever
Slide the camera unit's two release
levers and lock the power supply base
into position. No special tools required
for camera unit installation or removal.
VA-80LAN
JPEG Network board
(sold separately)
JPEG/H.264 Network board
(sold separately) See page 20 for details.
This expansion board for network connection enables SANYO
VCC-9800P / VCC-9700P / VCC-9600P / VCC-9500P to
connect to a network. The user can operate a network
connected camera using a web browser (Internet Explorer).
It comes with the VA-SW3050LITE viewer software.
VA-SW3050
Network Recorder
See page 20 for details.
Speed Dome Camera
(Surface type)
ATW
Internal sync.
AWC
Manual Line lock
Pelco-D
AF Zoom
Support
lens
Basic camera settings
can be made while
holding the settings
circuit board in hand, as
the board is detachable
from the power supply
base. The I/O side of the
board features 8 input
and 2 output terminals
for alarm signals.
Terminal side DIP switch side
(Side-A) (Side-B)
Address setting
Alarm inputs (8)
Baud rate setting
Alarm outputs (2)
RS-485/Coax setting
RS-485A/RS-485B
SSP/Pelco setting
Termination setting
VA-82LAN
(sold separately)
8