Table of Contents
Advertisement
Lifting the Drive
WARNING
Heavy Objects!
Failure to properly lift unit could result in death or
serious injury. Do not use cables (chains or slings)
except as shown. Each of the cables (chains or slings)
used to lift the unit must be capable of supporting the
entire weight of the unit. Lifting cables (chains or
slings) may not be of the same length. Adjust as
necessary for even unit lift. Other lifting arrangements
may cause equipment or property-only damage.
WARNING
Improper Unit Lift!
Failure to properly lift unit could result in death or
serious injury or possible equipment or property-only
damage. Test lift unit approximately 24 inches (61 cm)
to verify proper center of gravity lift point. To avoid
dropping of unit, reposition lifting point if unit is not
level.
Important:
AFDG (remote-mounted) and AFDU (unit-
mounted) have differing lift point locations
and lifting procedures. For AFDG, refer to
Figure 6, p. 17
refer to
Figure 7, p.
Table 3, p.
18.
Figure 6.
Lift point locations for AFDG (remote-
mounted)
AFDG-SVU01L-EN
and
Table 2, p.
17; for AFDU,
18, associated text, and
Table 2.
Drive weights for AFDG (remote-mounted)
Drive Panel SRRL
Voltage
Amp Rating
169
213
268
321
394
480
524
460/480
603
649
693
791
933
1031
1227
1360
138
171
215
258
306
356
400
575/600
444
507
560
649
756
840
942
1120
Drive and Cabinet
Frame
Weight (lb)
989
D3
1019
1121
D4
1144
1187
1504
1533
E2
1531
1634
2885
2885
F3
2885
2885
3419
F4
3419
989
D3
1019
1121
1145
D4
1187
1217
1504
1539
E2
1595
1681
2885
F3
2885
2885
3419
F4
3419
17
Advertisement
Table of Contents
