System Log - D-Link BROADBAND DSL-2740B User Manual

Section 3 - Configuration
The system log displays chronological event log data. The event log can be read from local host or sent to syslog server. The available event
severity levels are: Emergency, Alert, Critical, Error, Warning, Notice, Informational and Debugging.
Click Configure System Log button to enter system log configuration window.
Click Enable radio button and select Log/Display Level from the drop down list.
Select display mode from the Mode drop-down list; enter the syslog server IP address and port
number if Both/Remote Mode is selected.
Click Save/Apply button to apply your settings.
All events above or equal to the selected level will be logged.
Log Level:
All logged events above or equal to the selected level will be
Display Level:
displayed.
Display mode of system log. Local: Display on local host only
Mode:
Remote: Send log file to remote syslog server only
IP address of the remote syslog server
Server IP
Address:
UDP port number of the remote syslog server
Server UDP Port:
D-Link DSL-2740B User Manual

SYSTEM LOG

69