Virtual Server - D-Link BROADBAND DSL-2740B User Manual

Section 3 - Configuration
Use the Virtual Server window to set up single-port or static-port range forwarding rules applied to inbound (WAN-to-LAN) traffic. The Virtual
Server function allows remote users to access services on your LAN such as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-2740B
will accept remote requests for these services at your Global IP Address, using the specified TCP or UDP protocol and port number, and then
redirect these requests to the server on your LAN with the LAN IP address you specify. Remember that the specified Private IP Address must be
within the useable range of the subnet occupied by the Router.
Click the Add A Rule button to enter your virtual server configuration window.
Select a service from the drop down list for pre-configured server or select
Custom Server to define your own server.
Enter your server IP address, protocol and port number.
Click Add Rules button to apply settings.
IP address of your server
Server IP
Address:
Starting and Ending port number for remote users
External Port
Start/End:
Protocol used by your server
Protocol:
Starting and Ending port number that the router will forward
Internal Port
to (In most cases, they are the same as External port
Start/End:
numbers)
Notice There are many different pre-configured rules available for specific
functions such as Internet gaming, VPN, streaming and interactive multi-media,
standard TCP/IP protocols, reserved ports, p2p, network management
applications, and so on.
D-Link DSL-2740B User Manual

VIRTUAL SERVER

41