General Settings - Crestron Automate VX Series Product Manual

Microphone Table - Static Title Column
Select Dynamic Titling from Mic. Devices to dynamically pull titles from a Shure Discussion
l
System (if using).
Select Setup Titling from Dev/Mic. Number for use during system configuration. The active
l
device and corresponding microphone numbers will be displayed to verify that the correct
camera preset calls are made.
Select the Chairman Priority check box to always switch to a specified microphone whenever
someone speaks into it or it is gated. When this setting is turned on, enter a microphone number
in the Chairman Mic # text field to set that microphone to have chairman priority.

General Settings

Select the General tab to view the available general system settings.
General Tab
The following general system settings can be configured.
Output Settings
Three output settings are provided that can be turned on or off: SDI, NDI, and Virtual Camera.
Output Settings
Each output has a drop-down menu with the following selections:
NTSC
l
PAL
l
2160p 30 (VX 4K Only)
l
2160p 25 (VX 4K Only)
l
1080i 50
l
1080i 59.94
l
Product Manual — Doc. 9324A IV-SAM-VXP-1B and IV-SAM-VXS-1B • 27