Basic Operation; Main Menu - Crestron Automate VX Series Product Manual

Basic Operation

The following procedures describe how to operate basic functions of the Automate VX system.

Main Menu

Select the Main tab to view and perform common functions for the Automate VX system.
Main Menu Selections
Select AutoSwitch to start and stop automated switching. A blue outline is shown around the
button when autoswitching is turned on, and the system output will switch automatically based
on the active speaking participant. Select AutoSwitch again to stop automated switching.
Select Record to start and stop a recording. A red outline is shown around the button when
recording is turned on. Select Record again to stop recording.
Recordings can be paused and resumed. This option is turned off by default. To turn on
l
this option, refer to
If ISO recording is turned on, separate video files for each input are created in addition to
l
the main program recording.
Program recordings and ISO recordings are saved to local storage at D:\Recordings.
l
Select Copy File to copy any recordings to the destination specified in the copy file settings.
38 • IV-SAM-VXP-1B and IV-SAM-VXS-1B
General Settings on page 27.
Product Manual — Doc. 9324A