Table of Contents
Advertisement
System Configuration
The Automate VX system can be configured using its web configuration interface as described in
the sections that follow.
NOTE: Most system configuration can be accomplished by using the
Designer
tool. This tool is available on the Crestron website and locally on the Automate
VX system.
Access the Web Configuration Interface
To access the web configuration interface for the Automate VX system, open the Chrome®
browser on the Automate VX system. The web configuration interface loads automatically.
To access the web configuration interface from a different device:
1. Enter the IP address of the camera switching system with port 3579 appended to the
address (for example, "10.1.10.31:3579")
A login page is displayed.
Login Page
2. Enter the following login credentials:
username: admin
l
password: 1beyond
l
3. Select Login.
NOTE: Additional users can be set to access the Automate VX system. For more information,
refer to
Admin and User Settings on page 32
The web configuration interface opens with the Main tab open by default.
Product Manual — Doc. 9324A
Intelligent Video Room
IV-SAM-VXP-1B and IV-SAM-VXS-1B • 21
Advertisement
Table of Contents
