Touch & Fly: Waypoint; Touch & Fly: Poi - Parrot ANAFI USA User Manual

Hide thumbs Also See for ANAFI USA:

Table of Contents

Touch & Fly: Waypoint

Waypoint is the default "Touch & Fly" mode. It enables you to fly ANAFI USA to any

point on the map. Tap "Touch & Fly" from the "PILOTING MODE" box menu. The map of

your surroundings opens full screen. The live image captured by AN AFI USA is

minimized in the bottom right corner of your screen.

Tap a point on the map to select a destination for ANAFI USA: this point is marked as

a white circle with a green border. For each new Waypoint Touch & Fly session,

FreeFlight 6 asks you to confirm the first destination of AN AFI US A as on the

following screen capture. Tap the green "TAP HERE TO START" box, ANAFI USA flies

toward its designated destination. Use the slider on the right of the screen to control

the drone's altitude (the green figure inside the circle) when it reaches its destination.

Activate "Touch & Fly" Waypoint with care: be especially careful with your touches on the

screen in this mode, as after the initial confirmation, any tap on the map will immediately

send ANAFI USA to the corresponding spot.

For this reason, Parrot recommends you set your FreeFlight 6 filming or photography

options before activating the "Touch & Fly" Waypoint mode. If, by mistake, you have sent

ANAFI USA toward a dangerous area, tap the STOP box at the center of the top bar of

the HUD, or firmly reclaim commands from the Parrot Skycontroller USA.

Touch & Fly: POI

To access the POI Touch & Fly option, tap the "Type" box from the lower bar of the

HUD, and select POI.

In POI mode, tap a point on the map to create a point of interest (POI), marked as a

white square diamond with a blue border, labelled with a POI icon. Control the height

of the POI (the blue figure inside the square diamond) through the slider on the right:

this effectively controls the tilt of the gimbal, while you use the Parrot

Skycontroller USA to fly around your target. AN AFI USA remains focused on the POI.

Touch & Fly Waypoint: first destination confirmation screen

Table of Contents