Touch & Fly: Waypoint; Touch & Fly: Poi - Parrot ANAFI FPV User Manual

ANAFI
Touch & Fly: Waypoint
Waypoint is the default "Touch & Fly" mode. It enables you to fly ANAFI to any point
on the map. Tap "Touch & Fly" from the "PILOTING MODE" box menu. The map of
your surroundings opens full screen. The live image captured by ANAFI is minimized
in the bottom right corner of your screen.
Tap a point on the map to select a destination for ANAFI: this point is marked as a
white circle with an orange border. ANAFI immediately starts flying toward the
selected point. Use the slider on the right of the screen to control the drone's altitude
(the orange figure inside the circle) when it reaches its destination.
Touch & Fly: POI
To access the POI Touch & Fly option, tap the "Type" box from the lower bar of the
HUD, and select POI.
In POI mode, press and hold a point on the map to create a point of interest (POI),
marked as a white square diamond with a blue border. Control the height of the POI
(the blue figure inside the square diamond) through the slider on the right: this
effectively controls the tilt of the gimbal, while you use the Parrot Skycontroller 3 to
fly around your target. ANAFI remains focused on the POI.
70
iOS Touch & Fly: A N A F I flying to its destination
iOS Touch & Fly: POI