Error Messages - Casio Privia MA1003-A User Manual

Using a Memory Card

Error Messages

One of the error messages below appears on the display when a problem occurs.
• All mentions of "memory card" in the following table refer to an SD memory card.
Display
Message
Format 1. The current memory card format is not compatible
with this Digital Piano.
2. The memory card capacity is greater than 2GB.
3. There is something wrong with the memory card.
1. There is not enough room available on the memory
MediaFull
card.
2. There is not enough room available in Digital Piano
memory.
Media R/W 1. Memory card data is corrupted.
2. Digital Piano memory is corrupted.
1. The memory card is not loaded correctly in the Digital
No Card
Piano's memory card slot.
2. The memory card was removed while some operation
was in progress.
No File 1. There is no MUSICDAT folder (page E-41) on the
memory card.
2. There is no loadable or playable data in the
MUSICDAT folder, or there is no playable data in a
song playback folder (MUSIC__B, etc.)
You are attempting to play back SMF Format 2 song data. This Digital Piano supports playback of SMF Format0 or Format1
Not SMF01
The memory card is write-protected.
Protect
ReadOnly A read-only file with the same name you are trying to use
is already stored on the memory card.
SizeOver The data on the memory card is too big to play.
WrongDat 1. The memory card data is corrupted.
2. The memory card contains data that is not supported
by this Digital Piano.
E-48
Cause Required Action
1. Format the memory card on the Digital Piano (page E-46).
2. Use a memory card with a capacity of 2GB or less.
3. Use a different memory card.
1. Delete some of the files on the memory card to make room for
new data (page E-47), or use a different card.
2. Delete some or all user data from Digital Piano memory to make
room for new data.
1. Use a different memory card.
2. Backup Digital Piano memory data by copying it to your
computer, and then turn the Digital Piano off and then back on
again.
• Note that you may not be able to backup Digital Piano data in
certain cases.
1. Correctly load the memory card into the memory card slot.
2. Do not remove the memory card while any operation is in
progress.
1. Create a MUSICDAT folder on the memory card or format the
memory card on the Digital Piano (page E-46).
2. Move the file you want to load or play into the memory card's
MUSICDAT folder. For song playback, you can place the song
data into any one of the following folders: MUSIC__B,
MUSIC__C, or MUSIC__D.
only.
Use the memory card's write protect switch to enable writing.
• Use a different name to save the new file.
• Remove the read-only attribute from the existing file and
overwrite it with the new file.
• Use a different memory card.
This Digital Piano supports playback of song data files with a
maximum size of 320 KB.
—