Disk Drive Error Messages - Casio WK-1600 User Manual

Disk Drive Error Messages

Message
Err ReadOnly
Err Format
Err Disk R/W
Err DiskFull
Err Mem Full
Err Not SMF0
Err No Disk
Err No File
Err Protect
Err Convert
Err WrongDat
E-74
WK-1800/1600(E)-67~74
Cause
Attempt to save a file using the same
name as an existing file that is read
only.
1. The format of the diskette is not
compatible with this keyboard.
2. The diskette is not formatted.
3. The diskette is damaged.
The diskette is damaged.
The diskette is full.
Keyboard memory became full while
importing data from diskette.
The file you are reading is not an SMF
0 format file.
1. The diskette is not loaded in the
drive correctly.
2. No diskette is loaded in the drive.
The keyboard cannot find any file it can
read on the diskette.
The diskette is write protected.
The accompaniment pattern data you
are trying to convert is of a type that
cannot be converted by this keyboard.
The data on the diskette is corrupted.
Page 74
Action
Save the new file to a different diskette or use another
name.
1. Change to a diskette that has the proper format.
................................................................................ E-67
2. Format the diskette. ............................................. E-73
3. Use a different diskette.
Use a different diskette.
1. Use a different diskette.
2. Delete any files you no longer need in order to make
room for the data you want to save. ................. E-73
1. If you have user patterns stored in Pattern Sequenc-
er memory, use the following procedure to delete
user patterns you no longer need from the user area
(patterns 120 to 129).
1 Clear the work area using the procedure under
"Work Area Clear" on page E-54.
2 While the work area empty (cleared), use the pro-
cedure under "To exit the Pattern Sequencer
Mode and save work area contents" on page E-
56 to save the work area to the accompaniment
pattern user area accompaniment numbers that
contain patterns you no longer need. Saving the
empty work area effectively deletes data currently
stored in memory.
2. If you have song data stored in Song Sequencer
memory (SG0, SG1), delete the song data you no
longer need. .......................................................... E-46
Use SMF 0 format files only. ................................... E-69
1. Eject the diskette from the drive and reload it.
................................................................................ E-68
2. Load a diskette into the drive.
Use a diskette that contains data stored by this key-
board or compatible data from another device.
1. Use a different diskette.
2. Close the diskette's write protect hole to enable data
storage. .................................................................. E-67
Try converting other accompaniment pattern data.
Use other data or another diskette.
03.7.31, 5:22 PM
Adobe PageMaker 6.5J/PPC
733A-E-076A