Supported Operations During Midi File Playback - Casio Privia MA1003-A User Manual

Playing Back a MIDI File
3.
Press the  (CARD PLAYER) button so the
lamp below it is lit. This is the CARD PLAYER
mode.
• This displays the name of the first MIDI file in the
internal memory area.
• The remaining steps of this procedure are the same as
those starting with step 6 under "To play back a MIDI
file from an SD card" (page E-41).
Supported Operations During
MIDI File Playback
To change the playback tempo
There are two different methods you can use to change
the tempo setting: by pressing q (faster) and w
(slower) buttons or by tapping a beat with a button.
■ To adjust the tempo using the
w, q) buttons
Each press of a button increases or decreases the beats
per minute value by one.
• Holding down either button changes the value at
high speed.
• Pressing both of the 
the same time will return the song to its default
tempo.
• You can specify a tempo value in the range of 20 to
255.
E-42
 (TEMPO
(TEMPO w, q) buttons at
Tempo value
■ To adjust the tempo by tapping a beat
1.
While holding down the
button, tap the q
times in time with the beat you want to
specify.
• The tempo setting will change in accordance with the
timing of your tapping.
• After you use this method to specify the approximate
tempo, you can then use the procedure under "To
adjust the tempo using the
buttons" to adjust the setting to a more exact value.
• The setting will be canceled if you release the
(FUNCTION) button before tapping the q
(TEMPO) button four times.
Tap four times
To adjust playback volume in accordance
with keyboard play volume
See "Song Volume" (page E-40). For information about
how to change the setting, see "To change the setting of
a function menu item" (page E-38).
To sound a pre-count at the start of
playback
See "Song Pre-count" (page E-40). For information
about how to change the setting, see "To change the
setting of a function menu item" (page E-38).

(FUNCTION)

(TEMPO) button four
 (TEMPO w, q)

