Casio Privia MA1003-A User Manual page 17

To use layer and split together
LOWER 1
LOWER 2
1.
Use the "Tone List" (page E-57) to look up the
group(s) and numbers of the tones (UPPER 1,
UPPER 2, LOWER 1, and LOWER 2 zone
tones) you want to use.
2.
Check to make sure that the both the

(LAYER) and (SPLIT) button lamps are
unlit.
• If one or both lamps are lit, press the
 (SPLIT) buttons to turn them off.
3.

Press the (UPPER 1) button so its lamp is
lit.
• This indicates you can select the UPPER 1 zone tone.
Lit
4.
Select the UPPER 1 zone tone.
• For details about selecting tones, see "To select a
tone" (page E-11).
5.
Press the  (LAYER) button so its lamp is lit.
Lit
• This will cause the 
light. This indicates you can select the UPPER 2 zone
tone.
6.
Select the UPPER 2 zone tone.
UPPER 1
UPPER 2

 (LAYER) and
Unlit Lit
(UPPER 2) button lamp to
7.
Press the  (LAYER) button so its lamp is
unlit.
8.
Press the  (SPLIT) button so its lamp is lit.
Lit
• This will cause the 
light. This indicates you can select the LOWER 1 zone
tone.
9.
Select the LOWER 1 zone tone.
10.

Press the (LAYER) button so its lamp is lit.
Lit
• This will cause the 
light. This indicates you can select the LOWER 2 zone
tone.
11.
Select the LOWER 2 zone tone.
12.
Play something on the left and right sides of
the keyboard to confirm that the tones are
assigned and layered properly.
• You can change any of the zone tones at any time by
performing one of the operations shown below.
To change this
Do this:
zone's tone:
UPPER 1 zone Press the
then select a tone.
UPPER 2 zone Press the
then select a tone.
LOWER 1 zone Press the
then select a tone.
LOWER 2 zone Press the
then select a tone.
Selecting and Playing a Tone
Lit
(LOWER 1) button lamp to
Lit
(LOWER 2) button lamp to
 (UPPER 1) button and
 (UPPER 2) button and
 (LOWER 1) button and
 (LOWER 2) button and
E-15