Adjust The Height And Slide The Dishwasher Into Place - Asko DWCBI331.W Operating Instructions Manual

Table of Contents

Advertisement

Activate Auto dose system in the dishwasher's Settings menu. See the Settings chapter.
Diluting detergent and rinse aid
To correctly dilute detergent and rinse aid, calculate the dose based on the amount of water in the
machine.
Amount of water in the machine:
3.5 liter for detergent dose
3.5 liter for rinse aid dose
WARNING!
Note that there are risks involved in handling commercial detergent and rinse aid. Protective
gloves and goggles must be used when handling these products.
Follow the supplier's safety regulations concerning the handling and storage of detergent and
rinse aid.
WARNING!
Always install protective caps and plugs when disconnecting a system for automated dosage.

Adjust the height and slide the dishwasher into place

1. Start by measuring the height from the floor to the bottom edge of the worktop.
2. Measure the height from the floor to the top edge of the dishwasher.
3. Lean the dishwasher forwards a little and adjust the rear foot with the screw at the front of the
dishwasher. Turn clockwise to lower or anticlockwise to raise.
4. Adjust the front feet by turning them clockwise to raise and anticlockwise to lower the dishwasher.
Installation
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwcbi331.s

Table of Contents