Table of Contents
Advertisement
Table continued from last page
Settings
8.
Temperature unit
9.
Water hardness
10.
Interior light at
power off
Options
o
o
C/
F
0/1/2/3/4/5/6/7/8/9
On/Off
When using an all-in-one detergent that
contains rinse aid, you can activate the
setting TAB.
Temperatures can be displayed in °C
(Celsius) or °F (Fahrenheit).
Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct!
German
French
water
water
hardness
hardness
scale
scale
0-3°dH
0-5°fH
4-5°dH
6-9°fH
6-8°dH
10-14°fH
9-11°dH
15-20°fH
12-14°dH
21-25°fH
15-19°dH
26-34°fH
20-24°dH
35-43°fH
25-29°dH
44-52°fH
30-39°dH
53-70°fH
40°dH
71°fH
Do not forget to put salt in the salt
compartment after you have set the water
softener to 1 - 9.
For a water supply with a hardness under
4°dH (6°fH), select 0. The water softener is
deactivated and no salt is needed.
Select whether the interior light is to be
switched on when the dishwasher is turned
off and the door is opened. (If the main
power switch is turned on, the interior light
is always switched on when the door is
opened.)
Settings
Recommended
setting
0
1
2
3
4
5
6
7
8
9
25
Advertisement
Table of Contents
