Kohler 14RES Manual page 89

4. Original design, see Figure 6-3.
exhaust duct panel over the muffler:
a. Remove four screws. See Figure 6-3.
b. Remove the top exhaust panel.
1
2
1. Exhaust duct panel. Remove 4 screws
2. Top exhaust panel. Remove 2 screws.
Figure 6-3 Heat Shield (original)
SEE REAR HINGE
BRACKET VIEW
1
1. Thermal cover
2. Screw. Do not overtighten; allow to pivot.
3. Locknut(s)
Figure 6-4 Thermal Cover (revised design)
TP-6735 7/17
Remove the 5. Revised design with thermal cover, see Figure 6-4.
Remove the thermal cover:
a. Loosen and remove the locknuts from the front
b. Remove the thermal cover.
1
GM66564
SEE FRONT HINGE
BRACKET VIEW
and rear hinge brackets.
2
REAR HINGE BRACKET VIEW
3
FRONT HINGE BRACKET VIEW
Section 6 Disassembly/Reassembly
3
2
GM81036--C
89