Weight Mount Installation - Ferris SNAPPER PRO FAST-Vac 61 Operator's Manual

WEIGHT MOUNT INSTALLATION

Install Weight Carriers
Identify and follow the correct procedure for your unit.
IS1000Z Series
1. Install the left-hand and right-hand weight carriers
(E & H, Figure 40), bar clamps (F) and fasten with
the 5/16-18 x 2-1/2" bolts (B) and 5/16-18 nylon
lock nuts (G). Make sure carriers are tight against
the outside of the suspension arm and do not
interfere with the shock/spring assembly. Tighten
securely.
2. Install the counter weights (A) in the weight carrier
and secure with the clevis pins (D) and hair pin
clips (C).
C
D
H
Figure 40. Install Weight Carriers
A. Weight
B. 5/16-18 x 2-1/2 Bolt
C. Hairpin Clip
D. Clevis Pin
E. Weight Carrier-LH
F. Bar Clamp
G. 5/16-18 Nylon Lock Nuts
H. Weight Carrier-RH
B
F
G
G
A
B
C
E
F
Installation
A
D
25
GB