Ferris SNAPPER PRO FAST-Vac 61 Operator's Manual page 25

Install the Collector Bags
1. Raise the collector hood and slide the collector
bags (A, Figure 37) onto the frame rails (B).
NOTE: The collector bags are constructed with three
mesh panels and one solid panel. Install the bag with
the solid panel towards the front of the machine.
2. Lower the hood and push the lock pin (B, Figure
38) through the hood lock plate (A).
B
Figure 37. Install the Collector Bags
A. Collector Bag
B. Frame Rails
B
Figure 38. Lock Hood
A. Hood Lock Plate
B. Lock Pin
Installation
B
A
A
23
GB