Functions Of Parts; Top And Bottom - Zoom AMS-44 Operation Manual

Functions of parts

Top and bottom

■ Top
❶
POWER indicator
This lights when the power is on. This blinks when the remaining battery charge is low.
❷
Input type switch
Set this according to the equipment connected to Input 1.
❸
Stereo Link switch
Turn this on when inputting a stereo signal through Inputs 3–4. Input 3 will become the left signal while
Input 4 will become the right signal. When the Stereo Link switch is on, the input gain for both Inputs 3
and 4 is controlled by Gain knob 3. (→
❹
Gain knobs
Use these to adjust input signal levels. (→
❺
Level indicators
These indicators show signal levels after gain knob adjustment.
The indicator colors change according to the signal levels.
Lit green: Input signal is present. (−48 dBFS or higher)
Lit red: Input signal is clipping. (−1 dBFS or higher)
❻
MUSIC/STREAMING switch
This switches between MUSIC and STREAMING modes. Set it to MUSIC when using the AMS-44 to make
music with a DAW, for example. Set it to STREAMING when using it to stream on the web, for example.
(→
MUSIC mode, STREAMING mode)
■ Bottom
Stereo link overview)
Adjusting the input
6
gain)