Functions Of Parts - Zoom AMS-22 Quicktour

Functions of parts

① GAIN knob
Use this to adjust the input signal level
from the MIC/GUITAR jack.
② Level indicator
This indicator shows the signal level
after gain knob adjustment.
The indicator color changes according to
the signal level.
Lit green: Input signal is present.
Lit red: Input signal is clipping.
■ Left side
① 48V switch
This turns +48V phantom power ON/
OFF. Set this to ON when connecting
condenser mics.
② DIRECT MONITOR switch
Set this to ON to directly monitor sound
from the MIC/GUITAR jack before it
passes through the computer.
■ Top
③ POWER indicator
This lights when the power is on.
④ OUTPUT knob
Use this to adjust the volumes of signals
output from the OUTPUT standard
phone jacks and the Headphone jack.
■ Right side
③ LOOPBACK switch
Set this to ON to send a mix of the
sounds played by the computer and
input through the AMS-22 back to the
computer.
5