Running A Wash Cycle; Brief Instructions - AEG 72620 Instruction Book

Operating Instructions

Running a Wash Cycle

Brief Instructions

A washing cycle consists of the following steps:
0 1. Set the correct washing program:
– select the program and the temperature with the program selector
– select any program options if required
2. If necessary change the spin speed/select RINSE HOLD).
3. Set time delay if required.
4. Open the door, load the washing.
5. Shut the door.
6. Add detergent/conditioner.
7. Start washing program.
When the Washing Program has Finished:
Important! If the washing cycle ended with rinse hold, carry out a
PUMP OUT, SPIN or SHORT SPIN before opening the door.
8. Open the door, remove the washing.
9. Set the program selector to OFF.
10. Close the water tap.
We recommend you unplug the appliance and turn off the water
supply when the washing program has finished.
18