Washing Program Sequence - AEG 72620 Instruction Book

Washing Program Sequence

Program Progress Display
Prior to the start, the program steps chosen
are displayed on the program progress display.
During the washing program, the current pro-
gram step is displayed.
Multi-Display
The expected time remaining (in minutes) to
the end of the program is displayed on the
multi-display.
Counting down of the remaining time may be stopped or corrected by
3
the washing machine controller as a result of automatic adjustments to
the program (amount of washing, washing type, imbalance detection,
special rinse cycle, etc.).
Changing the Spin Speed
The spin speed can be changed or RINSE HOLD set during the washing
program.
Other settings cannot be altered.
Stopping the Program
0 To stop the washing program early turn the program selector to OFF.
The washing program can be interrupted at any time using the START/
3
PAUSE button and then continued by pressing the button again. It is
not possible to change the washing program during a pause.
Operating Instructions
23