AEG 72620 Instruction Book page 30

Operating Instructions
Malfunction
Washing has not been
spun sufficiently, there
is water left in the
drum.
Error code
Door cannot be opened
when the machine is
switched off.
Remnants of detergent
are building up in the
detergent dispenser
drawer.
Rinse water is cloudy.
When pressing a pro-
gram option button
the corresponding dis-
play does not light up
30
Drain hose is kinked.
Drain hose to high.
Drain pump is blocked.
(2
appears.
The water drainage system is
blocked.
The door is locked due to
safety reasons (DOOR
indicator is off).
Water tap is not fully open.
The inlet hose filter in the
coupling of the inlet hose at
the tap is blocked.
The inlet valve filter in the
coupling of the inlet hose at
the appliance is blocked..
The cause is probably a
detergent with a high silicate
content.
The program option selected
is not available with the pro-
gram set.
Possible Cause Remedy
Remove kink.
Check installation
instructions.
Switch off the machine
and pull the plug out of the
socket.
Carry out emergency empty-
ing (see "Carrying out an
Emergency Emptying").
Clean the drain pump.
Clean the blockage.
Wait until the DOOR
indicator is green.
Open the water tap fully.
Clean filter.
Clean filter.
No negative impact on the
rinsing results, possibly use
liquid detergent.
Make another selection.