Running a Wash Cycle
Brief Instructions
A wash cycle consists of the following steps:
0
1. Set the correct wash programme:
– select the programme and temperature using the programme selector
– if required, select programme option
2. If required change the spin speed/select rinse hold.
3. If required, set the DELAY TIMER.
4. Open the door and load the washing.
5. Close the door.
6. Add detergent/conditioner.
7. Start the wash programme by pressing the START/PAUSE button.
When the wash programme has ended:
Important! If the wash cycle has ended with a rinse hold, activate
DRAIN, SPIN or SHORT SPIN before opening the door.
8. Open the door and remove the washing.
9. Switch off the washing machine: set the programme selector to OFF.
Operating Instructions
19