Changing Tones - Roland HPi-7S Owner's Manual

Preventing a Part from Playing (Mute)
1.
Press the cursor buttons to select the part you want to
mute.
2.
Press the [-] [+] button or ,cursor left button left and right to
select Solo or Mute.
Button Function Explanation
Only the sounds in the selected part is
played (Solo).
Pressing the [+] button
Part other than those selected have an "M"
appearing with the numbers.
The sounds of the selected parts are not
played (they are muted).
Pressing the [-] button
The number of the muted part is displayed
as "M."
fig.16TrackMute-e
Muted Part
Press the [-] [+] button once more to cancel the solo or mute.

Changing Tones

1.
Press the Tone button to select the Tone group.
2.
Press the cursor buttons to select the tone.
Making Part Settings
This makes more detailed settings for the parts.
1.
Press the cursor buttons to select the part you want to edit,
then press the [ ] button.
A screen like the one shown below appears.
2.
Press the cursor left or right button to select the item, then
press the cursor up or down button to change the setting.
Item Explanation
Volume Changes the volume level.
Changes the amount of reverb effect applied to
Reverb
the sound.
Changes the amount of chorus effect applied to
Chorus
the sound.
Shifts the direction from which the sound is
heard between left and right.
Pan (Panpot)
Press the cursor up button to shift the sound to
the right, or press the cursor down button to
shift it to the left.
What's Panpot?
Panpot is the control that determines the placement of the sound
in the stereo sound field between left and right speakers. By
altering the Panpot setting, you can change the perceived
location of the sound between the left and right speakers.
Recording
1.
Press the cursor buttons to select the part you want to
record.
2.
Use the [ (Bwd)] or [
the measure you want to record.
3.
Set the recording tempo (p. 62) and metronome (p. 63).
4.
Press the [ (Rec)] button.
The HPi-7S goes into record standby.
5.
Press the [ (Play/Stop)] button to start recording.
The count is played, and then recording begins.
6.
Press the [ (Play/Stop)] button to stop recording.
Convenient Functions
(Fwd)] button to move to
95