Table of Contents
Advertisement
Case
Cause/Remedy
If you select a part that does not contain
performance data, notes will not be displayed in
the notation. Change the part that is displayed (p.
99).
Notation is not
The notation screen feature is particularly
indicated
unsuitable for the display of difficult, complex
properly in the
musical works that demand accurate notation.
display
Refer to "Some Notes on the Notation Screen" (p.
27).
In the notation screen, some lyrics or notes could
extend beyond the edges of the screen, and not be
displayed.
There may be times when a complex variety of
information is being displayed or when a large
Movement of
amount of data is displayed at one time. Change
notation or
the notation display settings as described below.
keyboard display
•Set "Bouncing Ball" to "Off" (p. 99)
not smooth
•Set "Color Notation" to "Off" (p. 99)
•Set "Keyboard" to "Off" (p. 26)
In certain cases, such as when playing the songs
Song becomes
on USB memory, the song may lag when excessive
unstable
amounts of performance data are used.
Demo song not
Could <BGM>, an "Auto Demo" setting, be
playing
switched off (p. 93)?
The song name will not be shown if the song
information in the file is empty or consists only of
Can't play back a
spaces.
song saved in
Is the filename extension "MID"?
USB memory
Files with other file name extensions cannot be
handled as song data.
Has the song name data (Sequence/Track Name
Meta Event) been entered in the file?
Song titles are not displayed if the song name data
is blank or consists exclusively of spaces.
Titles of songs on
USB memory or
Is the file name no more than eight single-byte
floppy disks not
characters?
being displayed
Is "MID" used as the extension?
The song cannot be treated as song data if a
different extension is used.
Volume of
Could the "Balance" setting be set all the way
accompaniment
toward "Keyboard"? (p. 61)
or internal song is
too low
Case
Cause/Remedy
Can't record
Has one of the track buttons for recording been
selected? (p. 73, p. 75, p. 77)
It is not possible to record while the notation is
Can't record
being generated. Once the unit has finished
generating the notation (i.e., when the measure
number in the screen is no longer highlighted), try
the operation once again.
If you select an internal song in which the tempo
changes during the song, and then record, the
tempo will change in the same way for the
performances that are recorded on the other
tracks. The tempo of the metronome will also
Tempo of
change in the same way.
recorded song or
metronome is off
If you record additional material without erasing
the previously recorded song, the song will be
recorded at the first-recorded tempo. Please erase
the previously recorded song before you re-record
(p. 76).
Any performance that has been recorded is
deleted when the power to the HPi-7S is turned off
The recorded
or a song is selected. A performance cannot be
performance has
restored once it's been deleted.
disappeared
Be sure to save it on an USB memory or "Favorites"
(HPi-7S Memory) before you turn off the power (p.
80).
About the audio file
Is the audio file in a format supported by the HPi-
7S?
Audio files of the following format can be played
Can't play back
back.
an audio file
•File extension "WAV"
•16-bit linear
•"44.1 kHz" sampling rate
Can't record
along with an
audio file
The HPi-7S can't record using audio files or copy
them into "Favorites".
Can't copy an
audio file into
"Favorites"
Troubleshooting
115
Advertisement
Table of Contents
