Usb Driver; System Requirement; Installation; Important - Rikaline GPS-6010-X5 User Manual

High Sensitivity

4. USB Driver

4.1 System Requirements
IBM, Pentium or above and other compatible PC; 16 MB and above memory; Windows 98/Me/2000; VGA
Graphic Adapter.

4.2 Installation

1. Copy entire <GPS-6010-X5 USB> folder from CD to hard disk.
2. Connect GPS-6010-X5 USB connector to computer. While the computer automatically starts the installation
program, please direct the driver to the <GPS-6010-X5 USB> folder.
3. After the installation is complete, go to <Device Manager> and select <Ports (COM & LPT)> to verify if a
virtual COM port <USB to Serial Port> was created.

4.3 Important

Verify the COM port # to start using your own navigating software.
1. Click <Start> menu, select <Settings>, then enter <Control Panel>.
2. After entering <Control Panel>, select <System>.
3. Select <Device Manager>.
Find the <Connect Port> and check the Virtual COM Port, which was created by the USB driver. Please
4.
note that the Virtual COM Port number might be different from every computer. Before using navigating
software, please confirm the COM Port numbers created by your computer and provided by your navigation
software. They must be the same Com Port numbers. Otherwise, the navigating software won't receive the
satellite signal for the un-match COM Port setting.
5. Warranty
The GPS-6010-X5 is warranted to be free from defects in material and functions for one year from the
date of purchase. Any failure of this product within this period under normal conditions will be replaced at no
charge to the customers.
Rikaline International Corp.
Tel: ++886 2 2370 4688 Fax: ++886 2 2370 4686
GPS-6010-X5 Operating Manual
10F, 64, Kang-Ding Road, Taipei 108, Taiwan
E-Mail: info@rikaline.com.tw
Rikaline
Web: www.rikaline.com.tw
10