Usb Driver; System Requirement; Installation; Important - Rikaline GPS-6011 User Manual

Rikaline gps-6011 gps receiver user's guide

Table of Contents

4. USB Driver

4.1 System Requirements

IBM, Pentium or above and other compatible PC; 16 MB and above memory; Windows 98/Me/2000; VGA

Graphic Adapter.

1. Copy entire <GPS-6011 USB> folder from CD to hard disk.

2. Connect GPS-6011 USB connector to computer. While the computer automatically starts the installation

program, please direct the driver to the <GPS-6011 USB> folder.

3. After the installation is complete, go to <Device Manager> and select <Ports (COM & LPT)> to verify if a

virtual COM port <USB to Serial Port> was created.

Verify the COM port # to start using your own navigating software.

1. Click <Start> menu, select <Settings>, then enter <Control Panel>.

2. After entering <Control Panel>, select <System>.

3. Select <Device Manager>.

Find the <Connect Port> and check the Virtual COM Port, which was created by the USB driver. Please

note that the Virtual COM Port number might be different from every computer. Before using navigating

software, please confirm the COM Port numbers created by your computer and provided by your navigation

software. They must be the same Com Port numbers. Otherwise, the navigating software won't receive the

satellite signal for the un-match COM Port setting.

Rikaline Marketing Corp.

Tel: ++886 2 2934 5456 Fax: ++886 2 2934 4373

Specifications subject to change without prior notice

5F-1, 125, Roosevelt Rd., Sec. 5, Taipei, Taiwan 116

E-mail:

info@rikaline.com.tw

Rikaline

Web:

www.rikaline.com.tw

Table of Contents