Panasonic KX-FP342CX Service Manual page 66

Code Function
523 Receive equalizer select
524 Transmission equalizer
select
550 Memory clear
551 ROM check
552 DTMF single tone test
553 Monitor on FAX
communication select
554 Modem test
555 Scan check
556 Motor test
558 LCD test
559 Document jam detection
select
561 KEY test
570 BREAK % select
571 ITS auto redial time set
572 ITS auto redial line
disconnection time set
573 Remote turn-on ring
number set
590 FAX auto redial time set
591 FAX auto redial time
disconnection time set
592 CNG transmit select
Set Value Effective
Range
1~4
1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km
1~4
1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km
1:ON 2: 1, 2
OFF
1:OFF 2: 1~3
PHASE B 3
:ALL
1:ON 2: 1, 2
OFF
1:61% 2: 1, 2
67%
X number 00~99
of times
X second 001~999
X number 01~99
of rings
X number 00~99
of times
X second 001~999
1~3
1:OFF
2:ALL
3:AUTO
66
Default
1 When the telephone station is
from the unit or reception cannot
performed correctly, adjust
accordingly.
1 When the telephone station is
from the unit or transmission
be performed correctly, adjust
accordingly.
See TEST FUNCTIONS
See TEST FUNCTIONS
2
See TEST FUNCTIONS
1 Sets whether to monitor the
signal with the unit's speaker
FAX communication or not.
See TEST FUNCTIONS
See TEST FUNCTIONS
0
See TEST FUNCTIONS
See TEST FUNCTIONS
1
See DOCUMENT JAMS - SENDING
See TEST FUNCTIONS
1 Sets the % break of pulse dialing
according PBX.
05 Selects the number of times
is redialed (not including the
dial).
065 Sets the interval of ITS redialing.
10 Sets the number of rings before
unit starts to receive a document
the TEL mode.
05 Selects the number of redial
during FAX communication (
including the first dial).
065 Sets the FAX redial interval during
FAX communication.
2
Lets you select the CNG output
during FAX transmission. ALL
is output at phase A. AUTO:
output only when automatic
performed. OFF: CNG id not
phase A. Refer to
IS A TRANSMIT PROBLEM
Remarks
().
().
().
().
().
().
().
().
SOMETIME
()