4. PC setting and recording
1. Set LINE IN to be valid in the volume control setting.
Refer to the PC instruction book.
2. Start up the PC software " SOUND RECORDER". (This software is
bundled to Windows OS, which can create WAV file.)
Set the audio format " PCM 22.050kHz, 8bit, mono".
3. Click the record button and start recording after acquisition the
signal.
Note:
- Not to be wind wave patterns on the wave monitor.
- Please compress the recording data when you send attaching to E-
Mail because the data size will be so heavy.
- Any software which can create WAV files is available.
6.6.5.1.8. HOW TO OUTPUT THE JOURNAL REPORT
1. Press [MENU] button.
2. Press [#], then [8] and [4].
3. Press [SET] button.
4. The report is printed out.
Error code table:
111