Panasonic KX-FP342CX Service Manual page 29

4.1.2.1. MAINTENANCE LIST
NO. OPERATION
1 Document Path
2 Rollers
3 Platen Roller
4 Thermal Head
5 Sensors
6 Glass
CHECK
Remove any foreign matter such as paper.
If the roller is dirty, clean it with a damp
cloth then dry thoroughly.
If the platen is dirty, clean it with a damp
cloth then dry thoroughly. Remove the
paper and film cartridge before cleaning.
If the thermal head is dirty, clean the
printing surface with a cloth moistened with
denatured alcohol (alcohol without water),
then dry thoroughly.
Hook switch (SW101), Paper top sensor
(PS501), Film end (SW501), Cover open
switch (SW502), Document top switch
(SW353), Document set switch (SW352).
Confirm the operation of the sensors.
If the glass is dirty, clean with a dry soft
cloth.
29
REMARKS
—
Refer to DOCUMENT FEEDER
—
Refer to THERMAL HEAD
See COMPONENT LOCATIONS
and HOW TO REMOVE THE
DIGITAL, ANALOG, POWER
SUPPLY, SENSOR BOARDSAND
AC INLET ().
Refer to DOCUMENT FEEDER