Toro Groundsmaster 4500-D Installation Instructions Manual page 6

5. Using the dimensions in
drill 6 holes (1.0 cm) through both walls of the
roller-support tube.
1. 6.4 cm (2-1/2 inches)
2. 8.9 cm (3-1/2 inches)
3. 14.0 cm (5-1/2 inches)
Drilling the Holes for the Horn
Bracket
Using the dimensions in
drill 2 holes (9/32 inch) through both walls of the
roller-support tube.
Figure 3, locate and
Figure 4, locate and
Figure 3
4. 1.0 cm (13/32 inch) diameter
5. 1.9 cm (3/4 inch)
1. 1.9 cm (3/4 inch)
2. 3.8 cm (1-1/2 inches)
6
Figure 4
3. 25.4 cm (10 inches)
4. 7 mm (9/32 inch) diameter
g371868
g029796