Toro Groundsmaster 4500-D Installation Instructions Manual page 22

Figure 42
1. Fuse block fuses
2. Module fuses
2. Install the fuse-box decal to the storage-box
cover (Figure 43).
Figure 43
1. Storage-box cover
g371821
3. Fuse clip fuse
g371731
2. Fuse-box decal
10
Installing the
Decal-Mounting Plates
Parts needed for this procedure:
2 Plate
4 Decal
4 Hex-head screw (1/4 x 2-1/2 inches)
4 Locknut (1/4 inch)
Procedure
1. Align the plates with the existing holes in the
light-kit brackets
Note:
Ensure the screws do not damage the
wire harness when installing them into the
brackets.
2. Secure the plates to the light-kit brackets with
the 4 hex-head screws (1/4 x 2-1/2 inches) and
4 locknuts (1/4 inch) as shown in
3. Apply the decals to the outward-facing surface
of the plates (Figure
1. Left rear light
2. Locknuts (1/4 inch)
3. Right rear light
22
(Figure 44).
Figure
44).
Figure 44
4. Decal
5. Plate
6. Hex-head screws (1/4 x
2-1/2 inches)
44.
g371654