Toro Groundsmaster 4500-D Installation Instructions Manual page 12

7
Installing the Wire Harness
Parts needed for this procedure:
1 Wire harness
2 Magnetic cable-tie mounts
8 Cable tie
Procedure
Use the following instructions and illustrations to route and connect the wire harness. When routing the light
harness, follow the main machine harness.
1. Remove the flange-head screw securing the
compartment clamp and seal to the traction unit
(Figure 17).
Figure 16
Note:
Remove the clamp and seal to gain
access to the fuse compartment.
12
g371786