Remote Operation; Remote Answer-On - Radio Shack TAD-222 Owner's Manual

43-722.fm Page 11 Friday, August 13, 1999 1:16 PM

REMOTE OPERATION

While you are away from your home
or office, you can use a touch-tone
phone, or a pulse phone with a pock-
et tone dialer (such as Cat. No. 43-
139), to enter a one-digit remote op-
eration security code and do any of
the following:
• Set the TAD to start or stop
answering calls
• Play or erase your messages
• Record a new outgoing mes-
sage
Notes:
• If you are using a pulse phone,
follow the pocket tone dialer's
instructions.
• Your one-digit remote operation
security code is on the bottom of
the TAD.
• Each time you enter a remote
operation security code or com-
mand code, hold down the
selected button for at least 2
seconds.

REMOTE ANSWER-ON

Note: You must record an outgoing
message before you can remotely
set the TAD to answer calls (see "Re-
cording the Outgoing Message").
1. Dial your phone number. After
60 seconds, the TAD answers
with four beeps.
2. Enter the remote
security code within 8 seconds.
The TAD beeps once, plays the
outgoing message, then begins
recording.
Note: If you do not enter the
security code within 8 seconds,
the TAD disconnects the call.
3. Hang up.
Note: If you want to use any remote
control commands at this point, see
"Using Remote Control Commands."
operation
11