Table of Contents
Advertisement
43-789.fm Page 27 Monday, August 16, 1999 8:32 AM
DELETING MESSAGES
To delete the current message during
playback, press
DELETE
handset.
Note: You can replay a deleted mes-
sage by repeatedly pressing
the base or handset before the TAD an-
nounces "End of messages."
To delete all messages in a mailbox or
the message center after playback,
press
then the mailbox or mes-
DELETE
sage center button. The TAD beeps.
Note: The TAD-1029 does not delete
unplayed messages.
CHANGING THE REMOTE
OPERATION SECURITY
CODE
To use your TAD from a remote tele-
phone, you must first enter a 2-digit re-
mote operation security code. The
security code for your TAD is preset to
50. You can use the preset code, or fol-
low these steps to change it.
Note: In Step 2 you must begin entering
on the base or
the new code within 20 seconds. Other-
wise, the TAD sounds 5 short beeps and
2 long beeps and stops the process. If
this happens, simply repeat Step 2.
1. Press
on
REPEAT
2. Press
3. Press
To check the remote operation security
code, press
TAD announces "Code is xx" and beeps
twice.
on the handset. The
REMOTE
indicator lights.
REMOTE
REMOTE Indicator
CHANGE ( )
then
The TAD announces "Enter new
code." Enter a new two-digit remote
operation security code. The TAD
announces "New code is xx" and
beeps twice.
. The
REMOTE
cator turns off.
then
REMOTE
CODE (7)
.
indi-
REMOTE
The
CODE.
27
Advertisement
Table of Contents
