Table of Contents
Advertisement
43-764.fm Page 19 Friday, August 13, 1999 2:43 PM
Follow these steps to record a memo.
1. Hold down
PLAY/SKIP
beeps.
2. Position yourself about 8 inches
away from the TAD and speak into
the microphone (located on the
front of the TAD).
3. The
TAD
automatically
recording after 60 seconds, or you
can press
ANSWER/STOP/DELETE
when you finish. The TAD beeps
once.
The memo is recorded along with the in-
coming messages. To hear the memo,
simply play back your messages.
CHANGING THE REMOTE
OPERATION SECURITY
CODE
The TAD's remote operation security
code is preset to 764. You can operate
your TAD remotely with this code; how-
ever, we recommend that you set your
own code.
Notes:
• You have 8 seconds to set each
individual digit. Otherwise, you
must start over from Step 1.
• If AC power fails and the backup
battery becomes weak, the remote
operation security code automati-
cally resets to 764
until the TAD
stops
.
1. Use a pointed object, such as a
straightened paper clip, to hold
down
(located on the right
CODE
side of the TAD) until the TAD
beeps and announces the first digit
of the current security code.
Illus. showing
CODE
2. Repeatedly press
to set the first digit,
OGM/REPEAT
then
press
. The TAD beeps and
DELETE
announces the second digit.
3. Repeatedly press
to set the second
OGM/REPEAT
digit, then press
. The TAD beeps and
DELETE
announces the third digit.
4. Repeatedly press
to set the third digit,
OGM/REPEAT
then
press
The TAD beeps once and
DELETE.
announces the complete remote
operation security code.
switch.
or
PLAY/SKIP
ANSWER/STOP/
or
PLAY/SKIP
ANSWER/STOP/
or
PLAY/SKIP
ANSWER/STOP/
19
Advertisement
Table of Contents
