Synchronizing Logs And Settings; Suuntolink; Tank Pressure - Suunto EON User Manual

Hide thumbs Also See for EON:

Table of Contents

Suunto EON Steel Black

3. If you have not yet set up your Suunto EON Steel Black, do so now (see 3.1. Device setup).

4. Tap the watch icon in the upper right corner of the screen.

5. Select your dive computer from the list of found devices and tap [PAIR] .

6. Enter the passkey shown on your dive computer display into the pairing request field on

your mobile device.

7. Tap [PAIR] at the bottom of the request field.

NOTE: You cannot pair any device if airplane mode is on. Turn off airplane mode before

pairing.

4.34.1. Synchronizing logs and settings

To be able to synchronize logs and settings, first you need to install Suunto app.

To download logs from your Suunto EON Steel Black and sync settings:

1. Connect Suunto EON Steel Black to your mobile device via Bluetooth.

2. Start Suunto app.

3. Wait for the syncing to complete.

New dive logs appear in your activity history, sorted by date and time.

Use SuuntoLink to update the software of your Suunto EON Steel Black. Download and install

SuuntoLink on your PC or Mac.

We strongly recommend updating your device when a new software release is available. If an

update is available, you are notified via SuuntoLink and in the Suunto app.

Visit www.suunto.com/SuuntoLink for further information.

To update your dive computer software:

1. Plug your Suunto EON Steel Black into the computer with the supplied USB cable.

2. Start SuuntoLink if it is not already running.

3. Click the update button in SuuntoLink.

TIP: To sync your dives, connect the device to Suunto app before the software update.

Your Suunto EON Steel Black can be used with the total number of twenty (20) gases per dive

mode, each of which may have Suunto Tank POD for wireless tank pressure transmission.

To install and pair a Suunto Tank POD, see 5.5. How to install and pair a Suunto Tank POD.

In tank pressure view, you can see the below screens.

The following example has the tank pressure alarm set to 100 bar. The tank pressure is 75 bar

as indicated in the switch window in the bottom right corner.

Tank pressure is shown in yellow when it is over 50 bar (720 psi) and below the tank pressure

alarm value set by the user:

Table of Contents