Ensure there are no other people in close proximity when you pressurize scuba gear. If the Tank POD does not connect to your dive computer, you must uninstall the Tank POD. Do not leave a non-functioning Tank POD attached to your scuba gear. Bring the non- functioning Tank POD to your nearest authorized Suunto dealer.
Page 3
AIR FLOW RESTRICTOR TYPE A For installation directly to first-stage high pressure port 123456789 depth, m 19:36 dive time 0’...
Page 4
AIR FLOW RESTRICTOR TYPE B For installation to high pressure hose extension to first- stage high pressure port 123456789 depth, m 19:36 dive time 0’...
6. If your Suunto EON device has a blank screen, press any button to activate it. Hold your device close to the Tank POD. 8. Select the gas for the Tank POD you have just pressurized based on the serial number of the POD.
Page 6
à la directive 2014/53/UE. Le texte intégral de la déclaration de conformité UE est disponible à l’adresse suivante: www.suunto.com/EUconformity. Suunto Oy declara por la presente que el equipo de radio de tipo DP142 cumple la Directiva 2014/53/UE. El texto completo de la declaración de conformidad de la UE se halla en la siguiente dirección de Internet: www.suunto.com/EUconformity.
Page 7
This product has been tested to comply with FCC standards and is intended for home or office use. Changes or modifications not expressly approved by Suunto could void your authority to operate this device under FCC regulations.