Table of Contents
Advertisement
Suunto EON Steel Black
No-fly time is the minimum surface time after a dive which is recommended to wait before
flying with an airplane. It is always at least 12 hours. For desaturation times shorter than 75
minutes, no-fly time is not displayed. Maximum no-fly time is 72 hours.
If decompression is omitted during a dive and the dive algorithm is locked for 48 hours (see
4.6.1. Algorithm lock), the no-fly time is always 48 hours. Similarly, if dive is done in gauge
mode (bottom timer), the no-fly time is 48 hours.
With Suunto Fused™ RGBM 2, the selected personal setting parameter (-2, -1, 0, +1, +2) is
affecting no-fly time. The more conservative personal setting you have, the longer no-fly time
values you will see. More aggressive personal setting will result in shorter no-fly time values.
Once the no-fly time calculated by your Suunto EON Steel Black with Suunto Fused™ RGBM 2
has ended, you can enter and fly with a normal airplane which is pressurized up to 3000 m.
WARNING: YOU ARE ADVISED TO AVOID FLYING ANY TIME THE COMPUTER COUNTS
DOWN THE NO-FLY TIME. ALWAYS ACTIVATE THE COMPUTER TO CHECK THE REMAINING
NO-FLY TIME PRIOR TO FLYING! Flying or traveling to a higher altitude within the no-fly time
can greatly increase the risk of DCS. Review the recommendations given by Divers Alert
Network (DAN). There can never be a flying-after-diving rule that is guaranteed to completely
prevent decompression sickness!
4.34. Suunto app
With the Suunto app, you can easily customize device and dive settings. See 4.9. Customizing
dive modes with Suunto app and 5.7. How to customize dive modes with Suunto app.
You can also transfer your dive logs wirelessly to the app where you can follow and share
your diving adventures.
To pair with Suunto app on iOS:
1. Download and install Suunto app on your compatible Apple device from the App Store.
The app description includes the latest compatibility information.
2. Start Suunto app and turn on Bluetooth if it is not on already. Leave the app running in the
foreground.
3. If you have not yet set up your Suunto EON Steel Black, do so now (see 3.1. Device setup).
4. Tap the watch icon in the upper left corner of the screen and tap on the ' + ' icon to add a
new device.
5. Select your dive computer from the list of found devices, tap [PAIR] .
6. Enter the passkey shown on your dive computer display into the pairing request field on
your mobile device.
7. Tap [PAIR] at the bottom of the request field.
To pair with Suunto app on Android:
1. Download and install Suunto app on your compatible Android device from Google Play.
The app description includes the latest compatibility information.
2. Start Suunto app and turn on Bluetooth if it is not on already. Leave the app running in the
foreground.
45
Advertisement
Table of Contents
