Dive History Memory [2 History]; Pc Settings Mode [3 Pc Set] - Suunto Gekko Instruction Manual

DIVE
DIVE
Fig. 4.13. Dive History
information. Total number of
dives, dive hours and
maximum depth.
Fig. 4.14. Data Transfer
mode. [3 PC SET].
OPTIONS
Fig. 4.15. Setting Options.
[4 SET].
42
4.1.2. Dive History Memory
[2 HISTORY]
MAX
The Dive History is a summary of all the dives re-
QUIT
corded by the dive computer. To enter the Dive His-
tory Memory Mode select MODE- MEMORY- HIS-
TIME
TORY (Fig. 4.12.).
The following information will be shown on the dis-
play (Fig. 4.13.):
• the maximum depth ever reached
• the total accumulated dive time in hours
• the total number of dives.
The Dive History Memory can hold a maximum of
999 dives and 999 diving hours. When these maxi-
mum values are reached, the counters will start again
from zero.
SELECT
4.1.3. PC Settings Mode
[3 PC SET]
Although the Gekko does not support PC-download,
the tissue calculations can be reset and all settings
returned to factory defaults using a PC-Interface
cable and special software. This feature is useful
for dive shops and their rental units only. The soft-
ware is not available to the general public.
To enter the PC Settings mode select MODE- 1
MEMORY- 3 PC SET (Fig. 4.14.).
NOTE! While in the PC SET mode, the connector/
water contacts are used only for the data transfer.
The Dive Mode IS NOT automatically activated if
QUIT
the contacts are submerged.
Press the SMART (Quit) to exit PC SET mode. If a
button is not pressed or no data is transferred within
5 minutes, the instrument beeps and returns to the
timekeeping display automatically.