Pairing And Unpairing; Pairing Suunto Tank Pod - Suunto Tank POD User Manual

Hide thumbs Also See for Tank POD:

Table of Contents

Suunto Tank POD

5. Pairing and unpairing

For Suunto EON Core, EON Steel, and EON Steel Black

To pair your Suunto Tank POD:

1. After installing Suunto Tank POD and opening the valve, wait for the green LED on the

POD to flash.

2. If your dive computer has a blank screen, press any button to activate it.

3. Use proximity pairing: Hold your dive computer close to the Suunto Tank POD. Make sure

you follow the instructions in 5.3. Tank POD alignment.

4. After a few seconds, a menu pops up on the screen showing the Suunto Tank POD serial

number, battery status, and the tank pressure. Select the correct gas from the list to pair

with your device and press middle button to confirm pairing.

NOTE: The battery level indication shown when pairing the Suunto Tank POD is an

approximation only.

5. Repeat the procedure above for additional Suunto Tank POD devices and select different

gases for each POD.

Alternatively, you can pair your Suunto Tank POD from the menu:

1. In the Gases menu, select the gas you want your Suunto Tank POD to pair with.

2. Press middle button to open the gas settings and select Tank POD.

Table of Contents