Preparing Your Notebook For Use; Unpacking And Checking Your Notebook - Fujitsu Siemens Computers Amilo Mini Operating Manual

Preparing your notebook for use

Notebook Gettingstarted Notebook First-timesetup
If your notebook comes with a Windows operating system then all of the necessary
hardware drivers and the supplied software will already be pre-installed.
When you switch on the notebook for the first time it will perform a system
check. A number of different messages may be displayed. In the process,
the display may flicker or darken temporarily.
Please follow the instructions on the screen.
It is very important that you do not switch the notebook off during this initial set-up process.
Before you can use your notebook for the first time you will need to charge the battery.
On delivery, the battery can be found in the battery compartment or in the accessories kit. The
battery must be charged if you want to operate your notebook with the battery.
When not plugged into a mains socket, the notebook runs on its built-in battery. You can
increase the battery's life by enabling the system's energy saving functions.
If you use the notebook in at home or in an office, we recommend you use
the mains adapter instead of the battery.

Unpacking and checking your notebook

Should you discover any damage incurred during transportation, notify
your local sales outlet immediately!
► Unpack all the individual parts.
Transport Packaging
► Check your notebook for damage incurred during transportation.
We recommend that you keep the original packaging material.
You may need the packaging in the future if you need to transport your device.
AMILO Mini Operating Manual, edition 2
Preparing your notebook for use
7