Table of Contents
Advertisement
Operation
4.3 Charging process
5. Confirm the prices by verifying the debit card once again. Place your debit card once again in
front of the card reader until it has been verified. This may take a few seconds.
Figure 4-5
Confirm with card
6. Depending on the configuration (configuration via web interface or backend) of your device,
the software will now check your authorization to charge a vehicle.
7. The charging station now unlocks the cover lock.
8. Plug the plug connector of the charging cable into the power outlet of the charging station.
Make sure that the charging cable and the connecting cables are not damp or dirty. Follow
also the instructions of the vehicle manufacturer.
9. The communication connection to the vehicle is established. The LED status display changes
from yellow to blue. This process can take some time depending on the connection speed
and reaction speed of the backend.
10.The device locks the plug into the socket.
11.After successfully locking the connector, the charging process starts automatically, and the
LED status display pulsates blue. The vehicle is now being charged. The connectors are still
protected against unauthorized removal.
12.The HMI informs you about the current charging status.
13.The vehicle is fully charged as soon as the LED status display changes from flashing to
permanently lit.
18
SICHARGE Operating Manual ERK
Operating Manual, 02/2022, A5E48572458-AD
Advertisement
Table of Contents
