Note
Set Antenna powering to On only if you
need to power an active-indoor antenna that
requires a 5 V power supply not exceeding
50 mA current consumption. Be sure to read
your indoor antenna's user manual before
turning this setting on.
To control antenna output, press to
highlight Antenna output and press or
OK. Use
/
to highlight Inactive in eco
mode or Always active.
Press
or BACK
and return to the previous menu.
Note
If Antenna output is set to Inactive in
eco mode while Antenna powering is
set to On, the device(s) connected to the
To TV/VCR output will not receive the
antenna signal.
To see information about your HD receiver,
press and highlight System information.
Details such as software version, model
number, serial number, etc., are displayed on
the right.
Press
or BACK
Settings menu.
Maintenance
to save your changes
to return to the
6
Maintenance
6.1
Cleaning
For cleaning, use a soft, damp (not wet) cloth.
Never use any abrasive cloth and aerosol
cleaners
6.2
Replacing
Your HD receiver does not contain any user-
serviceable parts. Do not attempt to open it.
All maintenance work must be carried out by
qualified service centres.
6.3
Disposing
Your HD receiver is designed and manufactured
with high-quality materials and components,
which can be recycled and reused.
Please inform yourself about the local separate
collection process for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. The correct disposal
of your old product will help prevent potential
negative consequences for the environment and
human health.
27