Table of Contents
Advertisement
Use
/
/
/ to set the time period
during which you will be able to watch any
unlocked channel without having to enter
your PIN code. Press the green button to
confirm.
To delete the child timer, make sure Modify
child timer is highlighted and press the red
button.
To modify the child timer, make sure Modify
child timer is highlighted and press
OK. Make the required changes and press
the green button to confirm.
To lock a channel, use
Channel lock, and press or OK.
Use
/ to highlight the channel you want
to lock, and press OK. Press
to return to the previous menu.
To change your PIN code, use /
Change PIN code, and press or OK.
Use the number buttons to first enter
your current PIN code and then enter
your new PIN code. Use the number
buttons to enter your new PIN code again,
for confirmation. If you correctly entered
the PIN codes, your HD receiver briefly
displays a message confirming that your PIN
has been changed, and then returns to the
Parental Control menu.
Note
Your new PIN code can be any 4-digit
number other than the default PIN code
(0000).
Press
or BACK
Settings menu.
Retuning your HD receiver
From the Settings menu, use
highlight Set-up and press or OK.
In the Set-up menu that appears,
make sure Channel installation is
highlighted and press or OK.
In the Channel Installation menu that
appears, make sure Re-tune is highlighted
and press or OK.
Using more of your HD receiver
or
/
to highlight
or BACK
to highlight
to return to the
/
to
A progress screen displays to confirm that the
search is taking place.
Press the green button to save any new
channels and return to the Set-up menu.
Press the red button to cancel the search and
return to the Set-up menu.
Note
The Network messages menu (under the
Settings menu) alerts you of any changes
to your network such as recently added
channels, services, etc. To save time, check
this menu before retuning your HD receiver.
Updating your HD receiver's software
manually
You can manually update your HD receiver
software using a USB memory stick.
Download the latest software file from the
Philips website (www.philips.com/support),
unzip it and transfer it to a USB memory
stick. Be sure to place the downloaded file
in the top-level folder of your USB memory
stick.
Connect your USB memory stick to the USB
connector on the rear panel of your HD
receiver.
From the Settings menu, use
highlight Set-up and press or OK.
In the Set-up menu that appears,
use
/
to highlight Software update and
press
or OK.
/
to
25
Advertisement
Table of Contents
