Set Water Softening; Softening Salt - Bosch SMI8ZCS02E User Manual

Table of Contents

Advertisement

Remark:Set the device to the
determined water hardness.
→ †Set water softening", page
29
With a water hardness of 0 - 6 °dH
you do not need to use softening salt
for dishwashers and you can switch
off the water softening.
→ †Switching off water softening",
page 30

Set water softening

Set the device to the water hardness.
Determine the water hardness and the
1.
desired setting value.
→ †Overview of the water
hardness settings", page 28
Press.
2.
Approx. Press for 3 seconds to access
3.
the basic settings.
Press repeatedly until the display
4.
shows "Water hardness".
Press or repeatedly until the desired
5.
water hardness is set.
The factory setting is 13 - 16.
To save the settings, press for
6.
approx. 3 seconds.

Softening salt

You can soften the water with
softening salt.
Filling softening salt
If the Refill softener salt indicator
lights up, top up the softener salt in
the softener salt reservoir immediately
before the program starts. The
consumption of softening salt
depends on the water
degree of hardness. How
degree of hardness, des t
consumption of softener
higher the water
e higher it is
ngsalt.
Softening SystemNL
PAY ATTENTION!
†Dishwasher detergent can damage the water
damage hardening.
Only fill the water softener
reservoir with dishwasher
softening salt.
†The rinse aid container can be
softening salt for dishwashers
corrode.
To ensure that spilled softening
salt is rinsed from the rinse aid
container, the softening salt must
be filled into the softening salt
reservoir immediately before the
program starts.
Open the lid of the softening salt
1.
reservoir and remove it.
When using for the first time: fill the
2.
reservoir completely with water.
3. Note:Only use dishwasher
softening salt.
Do not use salt tablets. Do not
use table salt.
Place the softening salt in the
softening salt reservoir.
Fill the water softening salt
reservoir completely with softening
salt. The water in the reservoir is
displaced and flows away.
Fit and close the lid of the
4.
reservoir.
29

Advertisement

Table of Contents
loading

Table of Contents