Start Program; Interrupt Program; Cancel Program; Displaying Program Information - Bosch SMI8ZCS02E User Manual

Table of Contents

Advertisement

NLThe Ministry in essence

Start program

Press
aThe program has ended when
down the display shows "Ready".
Comments
†If you want to add crockery
while the appliance is already
running, do not use the tablet tray
as a handle for the upper basket.
This will allow you to come into
contact with the partially dissolved
tab.
†You can view the current program
borrow change by aborting the
program.
→ †Cancel program", page
38
†To save energy, it is
appliance switches off automatically
1 minute after program end. If you
open the door immediately after the
program has ended, the appliance
will switch off after 4 seconds.
Pause program
Remark:If you open the appliance door
when the appliance has heated up, it is
best to leave the appliance door ajar
for a few minutes and then close it. In
this way you prevent an overpressure
occurring in the appliance and the
appliance door from jumping open.
1.
impressions.
aThe program is saved
and the device turns off.
Press to continue the program.
2.
38

Cancel program

To end a program prematurely or to
change a started program, you must
cancel the active program.
Approx. Press for 4
seconds.
aAll indicators are lit. aOnce the
indications are off,
appears first "Program has been
aborted." and then "Done" on
the display.
aThe program is aborted
and is closed after approx. 1 minute.
Show program information
You can display information about
programs and additional functions on
the display.
Press.
1.
Press the program button or
2.
additional function.
Switch off device
The instructions for "safe use" →
1.
Page 11 consider.
Press.
2.
Tip:If you press
is pressed, the current program is
interrupted. When you switch on the
appliance, the program will continue
automatically.

Advertisement

Table of Contents
loading

Table of Contents