3Com 3C996B-T User Manual page 78

7 Linux Driver Setup
70
NOTE: Forming multiple teams is possible by copying the sample files into "/etc/
basp/" and modifying this file as described in the sample file. The files must have
unique filenames. Name the files "team-xxx" where "xxx" is a unique identifier
for the team.
NOTE: To create more that one virtual interface (VLAN) for each team, refer to the
respective description section in the sample files.
BASPCFG Command Line Tool
The baspcfg command line tool is used to configure the Advanced Server Features teams,
add and remove NICs, and add and remove virtual devices. The following is an example of
the usage of this tool.
baspcfg v1.1.6 All rights reserved.
usage: baspcfg
commands
addteam <tid> <type> <tname>
delteam <tid>
addva <tid> <vlan_id> <vname>
[macaddr]
delva <tid> <vlan_id>
bind <tid> <role> <device>
unbind <tid> <device>
show <tid>
where
A unique ID for each team, starting from 0
tid
Team type: 0=SLB, 1=FEC/GEC
type
ASCII string of the team
tname
VLAN ID: from 1 to 4094, 0=untagged or no VLAN
vlan_id
ASCII string of the virtual device
vname
MAC address (optional), e.g. 00:10:18:00:11:44
macaddr
Role of the physical device: 0=primary, 1=hot-standby
role
ASCII string of the physical device, e.g. eth0
device
create a team
delete a team
add a virtual adapter to a team
del a virtual adapter from a team bind
bind a physical adapter to a team unbind
unbind a physical adapter from a team
display team configurations