3Com 3C996B-T User Manual page 69

VLAN=3
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V4_EII VSLOT=1
VLAN=4
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_V_EII SLOT=1
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_2_V_EII SLOT=2
# Bind BASP.LAN to the NIC adapters in the team for each
protocol
# Note: BASP BIND is only used for the first VLAN all other
VLANs are automatically # bound to the virtual adapter
(VSLOT=1).
BASP BIND BASP_1_V2_EII B57_1_V_EII
BASP BIND BASP_1_V2_EII B57_2_V_EII
#Bind protocols to BASP.LAN.
BIND IP BASP_1_V2_EII ADDR=192.168.2.200 MASK=255.255.255.0
BIND IP BASP_1_V3_EII ADDR=192.168.3.200 MASK=255.255.255.0
BIND IP BASP_1_V4_EII ADDR=192.168.4.200 MASK=255.255.255.0
mount all
NOTE: If you modify any adapter parameters, you must reboot the system before the
changes take effect. If you make changes and do not reboot, you may experience
problems. If the driver was loaded at console, however, no reboot is necessary.
Example of Multiple SLB TEAMs with Multiple Frame Types:
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_EII VSLOT=1
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_2_EII VSLOT=2
LOAD BASP.LAN FRAME=ETHERNET_802.2 NAME=BASP_1_E82 VSLOT=1
LOAD BASP.LAN FRAME=ETHERNET_802.2 NAME=BASP_2_E82 VSLOT=2
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=1
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_2_EII SLOT=2
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_3_EII SLOT=3
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_4_EII SLOT=4
LOAD B57.LAN FRAME=ETHERNET_802.2 NAME=B57_1_E82 SLOT=1
LOAD B57.LAN FRAME=ETHERNET_802.2 NAME=B57_2_E82 SLOT=2
LOAD B57.LAN FRAME=ETHERNET_802.2 NAME=B57_3_E82 SLOT=3
LOAD B57.LAN FRAME=ETHERNET_802.2 NAME=B57_4_E82 SLOT=4
BASP BIND BASP_1_EII B57_1_EII
BASP BIND BASP_1_EII B57_2_EII
BASP BIND BASP_2_EII B57_3_EII
BASP BIND BASP_2_EII B57_4_EII
BIND IP BASP_1_EII ADDR=172.16.3.50 MASK=255.255.0.0
BIND IPX BASP_1_E82 NET=ABAB
BIND IP BASP_2_EII ADDR=172.17.5.23
MASK=255.255.0.0 BIND IPX BASP_2_E82 NET=BEEF
Uninstalling Advanced Server Features
61